| Adafruit Feather HUZZAH |
Tested |
May require driver installation. Automatically resets to bootloader mode on firmware upload. |
| Adafruit HUZZAH |
Tested |
Requires FTDI cable. To put device in to bootloader mode, hold GPIO0 button while inserting USB in to your computer. |
| NodeMCU V3 |
Tested |
Requires installation of ch340g driver for macOS. Information can be found here. For Mac there can be issues installing the driver. Work around can be found here. |
| NodeMCU V2 |
Tested |
May require driver installation. Automatically resets to bootloader mode on firmware upload. |
| WiFi Witty |
Tested |
Requires installation of ch340g driver for macOS. Information can be found here. For Mac there can be issues installing the driver. Work around can be found here. |